Actron CP9035 OBD II Diagnostic Tester Amendment Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Actron CP9035 OBD II Diagnostic Tester Amendment. Actron CP9035 OBD II Diagnostic Tester Amendment User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Page 4-1 is amended to ADD the following:
Reading Codes/Read Pending Codes
Pending Codes, also referred to as Continuous Tests or Maturing DTCs,
obtain test results from continuously monitored emission-related powertrain
components and systems. Certain OBD II monitors are run continuously as
the car is operated under normal driving conditions. This function reports test
results to the PCM after a single drive cycle. The Pending Codes function is
useful after a vehicle repair or after clearing PCM diagnostic data. Test results
reported by this function do not necessarily indicate a faulty component or
system. The READ key retrieves Codes and Pending Codes.
NOTE
On some vehicles, Read Codes, retrieve Pending Codes and
Erasing Codes can take approximately 20 seconds to complete.
Change the Indication after pressing the READ key as follows:
All four Code Type Indicators will light individually in a clockwise
rotation to indicate the tester is working.
Codes set in the PCM memory will be indicated by a STEADY LED
Code Type indicator (Powertrain, Body, Chassis or Uart).
Pending Codes that are retrieved are indicated by a FLASHING LED
Code Type indicator.
NOTE
All retrieved Codes will be displayed first, followed by Pending
Codes.
When scrolling through Read Codes/Pending Codes, be sure to
wait a few seconds between codes whether the LED is FLASH-
ING or STEADY ON.
Section 4
ERRATA SHEET
Change the Indication after pressing and holding the ERASE key
as follows:
Press and hold the ERASE key for approximately 3 seconds. The
four LEDs will alternately FLASH 2 at a time (Powertrain/Chassis,
then Body/Uart) indicating an Erase command has been re-
quested.
0002-000-2379
Page 4-2 is amended to ADD the following:
Vue de la page 0
1

Résumé du contenu

Page 1 - ERRATA SHEET

Page 4-1 is amended to ADD the following:Reading Codes/Read Pending CodesPending Codes, also referred to as Continuous Tests or Maturing DTCs,obtain t

Commentaires sur ces manuels

Pas de commentaire